Environmental TanksCapabilities

The J-5000cx is a 10 gallon reciever and will handle 310 gph, and can be configured to meet any standard or application you may need.

The J-7000 is a 30 gallon tank with a capacity of 1400 gph, and can be configured to meet any standard or application you may need.

The JATCO Tank is placed below waste producing equipment where these liquids, instead of being allowed to spill and contaminate the soil and water, are allowed to gravity flow into the tank where they collect. When the JATCO Tank is full of liquid, a float operates a three-way valve, allowing gas pressure to force the liquids out of the tank. The discharge side of the tank is connected to a pipe carrying the waste fluids to stock tanks for proper recycling or disposal. When the tank is empty, the float moves the three way valve to the closed position. The gas pressure is then vented from the tank, allowing it to fill again by force of gravity.

The JATCO Environmental Tank has very few moving parts and can use normally available gas pressure as the motive force to pump the waste fluid.

JATCO Environmental Tank Applications:

• Waste fluid from glycol dehydrators

• Lubricating oil and used engine oil from gas compressors

• Packing leaks from centrifugal and reciprocating pumps

• Packaging leaks from oil well pump jacks

• Overflow or vent lines

• Waste liquid from flare lines

• Storm water runoff from equipment skids

• Distillates pump